Worm Gearbox

Product Details:

Worm Gearbox TW series, Bonfiglioli Gearboxm Motovario Gearbox, TGPL Gearbox, Worm gearbox,
Model :- TW 30 to TW 150
Ratio :- 7.5 to 100 : 1

Product Details:

• Motovario Worm Gear Box
• Input power: 0.25 HP to 10 HP
• Speed Ratio: 7.5, 10, 20, 25, 30, 40, 50, 60, 80, 100
• Standard Model: NMRV box type 30, 40, 50, 63, 75, 90,110 with Suitable AC motors

Product Details:

Aluminium Box TGPL Make Worm Gear Motor, For Industrial, Size: Tw 30 To Tw 150
Worm Gearbox TW series
Model :- TW 30 to TW 150
Ratio :- 7.5 to 100 : 1

Product Details:

Reduction Gearbox / worm gear units

We have thoroughly redesigned our two-stage SK 02040 helical worm gear unit. The new SK 02040.1, made from high strength aluminium, replaces the previous product. The die-cast aluminium housing guarantees maximum strength and rigidity with low weight and can be further protected by additional measures such as the highly effective nsd tupH surface treatment. The SK 02040.1 has a wide power range from 0.12 to 1.1 kW and an output torque of up to 100 Nm. The wide range of speed ratios (from 5.37:1 up to 330:1) enables optimum adaptation to the customer's requirements. The motor can be mounted directly without a coupling or via an adapter (IEC or NEMA).

Application :-

• Soft and quiet running
• High overload capacity
• Robust design for long life and easy maintenance
• High axial and radial load capacities enable safe operation
• Robust grey cast iron housing
• Application-specific versions

Product Details:

Our range of "MOTOVARIO" worm reduction gear units is manufactured in different sizes and ratios in adaptable types as well as fix foot mounting type. Our range is available in various sizes ranging from 28.5 mm to 304.8 mm center distance with the wide choice of rations from 5:1 to 70:1 in single stage and 100:1 to 4900:1 in two stage.

Our range of worm gear box are equipped with:

• Gear Housing: It is made from closed ALUMINIUM/GI. Large cooling fins are provided on both sides for adequate cooling.
• Worm: Worm Shaft is of single piece accurately made out of high grade alloy steel & is highly polished.
• Worm Wheel: It is made of cast phosphorous Bronze(PB2) rim shrunk on central cast iron boss. Teeth are accurately hobbed by generating process. To facilitate interchangeability, each worm wheel is inspected to match the master piece.
• Bearings: The ball or Tapper roller bearings with ample capacity are used in Worm & Worm Wheel shaft to take journal as well as thrust loads.
• Oil Seals: Best quality oil seals are used.
• Lubrication: Gears and Bearing are automatically and positively lubricated at all speed by splash of oil from the sump. Thus no special attention is necessary except periodically checking the oil level.